Filter By
Availability
Brand
Price
Active filters
Small ball bearing module. Large ring outer dimension - 63 mm, small ring inner dimension - 44 mm (33 bearings).
Small ball bearing module. Large ring outer dimension - 63 mm, small ring inner dimension - 44 mm (33 bearings).
A block stud assembly with wide toggle and nut, to fit Z-Spars steps and collars with 10mm holes and 17mm wide slots for nuts. Stainless steel nut slides into recess in side of deck casting, toggle screw threads in through hole in top. Articulating wide toggle has a 24mm and an 8mm clevis pin.
A block stud assembly with wide toggle and nut, to fit Z-Spars steps and collars with 10mm holes and 17mm wide slots for nuts. Stainless steel nut slides into recess in side of deck casting, toggle screw threads in through hole in top. Articulating wide toggle has a 24mm and an 8mm clevis pin.
Aluminum spreader tip for use with the Z240 spreader. The tip is a maximum of 165 mm long x 130 mm wide (pin 12/19).
Aluminum spreader tip for use with the Z240 spreader. The tip is a maximum of 165 mm long x 130 mm wide (pin 12/19).
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 4,50 meters.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 4,50 meters.
A special bracket for attaching a bowsprit to a catamaran's crossbeam
A special bracket for attaching a bowsprit to a catamaran's crossbeam
This plate is mounted at the end of the bowsprit. Support wires attached to the hull of the boat can be fixed to the ends of the plate
This plate is mounted at the end of the bowsprit. Support wires attached to the hull of the boat can be fixed to the ends of the plate
Gray plastic spreader tip for use with Z60 spreader. Includes 5mm J-bolt with locknut, Z-1480A, to clamp shroud to the spreader tip prior to installation in the spreader tube. The tip is a maximum 45 mm long x 24 mm wide.
Gray plastic spreader tip for use with Z60 spreader. Includes 5mm J-bolt with locknut, Z-1480A, to clamp shroud to the spreader tip prior to installation in the spreader tube. The tip is a maximum 45 mm long x 24 mm wide.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6,8 meters.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6,8 meters.
Anodized aluminum profile for Z341 spreader type. Sold by the meter. Z341 spreader dimensions: 155 × 49 mm
Anodized aluminum profile for Z341 spreader type. Sold by the meter. Z341 spreader dimensions: 155 × 49 mm
Anodized aluminum profile for Z180 spreader type. Sold by the meter. Z180 spreader profile dimensions: Outside measurements: 93mm x 40mm Inside measurements: 86mm x 32mm Wall thickness: 3mm Z180 spreaders can not be tapered
Anodized aluminum profile for Z180 spreader type. Sold by the meter. Z180 spreader profile dimensions: Outside measurements: 93mm x 40mm Inside measurements: 86mm x 32mm Wall thickness: 3mm Z180 spreaders can not be tapered
Large ball bearing module. Large ring outer dimension - 80 mm, small ring inner dimension - 60 mm (44 balls available).
Large ball bearing module. Large ring outer dimension - 80 mm, small ring inner dimension - 60 mm (44 balls available).
Anodized aluminum profile for Z362 boom type. Sold by the meter. Z362 boom profile dimensions: Outside Measurements: 140mm x 95mm Wall thickness: 2,60 mm Weight/M.: 3,64 kg
Anodized aluminum profile for Z362 boom type. Sold by the meter. Z362 boom profile dimensions: Outside Measurements: 140mm x 95mm Wall thickness: 2,60 mm Weight/M.: 3,64 kg
Anodized aluminum profile for Z482 boom type. Sold by the meter. Z482 boom profile dimensions: Outside Measurements: 190mm x 101mm Wall thickness: 3,60 mm Weight/M.: 5,21 kg
Anodized aluminum profile for Z482 boom type. Sold by the meter. Z482 boom profile dimensions: Outside Measurements: 190mm x 101mm Wall thickness: 3,60 mm Weight/M.: 5,21 kg
Anodized aluminum profile for Z240 spreader type. Sold by the meter. Z240 spreader profile dimensions: Outside Measurements (Untapered): 130mm x 40mm Inside Measurements: 86mm x 32mm Wall thickness: 3mm Weight/M.: 2.4kg The Z240 spreader section features an integral "tail", so that the...
Anodized aluminum profile for Z240 spreader type. Sold by the meter. Z240 spreader profile dimensions: Outside Measurements (Untapered): 130mm x 40mm Inside Measurements: 86mm x 32mm Wall thickness: 3mm Weight/M.: 2.4kg The Z240 spreader section features an integral "tail", so that the...
Z-SPARS Track for 25-5 mm boom (per meter)
Z-SPARS Track for 25-5 mm boom (per meter)
Mast track 25 mm. Sold by the metre.
Mast track 25 mm. Sold by the metre.
Mast track 25 mm. Sold by the metre.
Mast track 25 mm. Sold by the metre.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6 meters.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6 meters.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6 meters.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6 meters.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6,50 meters.
Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6,50 meters.
Teflon rod is used in outhaul cars instead of ball bearings (suitable with 3074, 3849 cars)
Teflon rod is used in outhaul cars instead of ball bearings (suitable with 3074, 3849 cars)
Rope fairles. Hole center spacings are 40 mm and 70 mm.
Rope fairles. Hole center spacings are 40 mm and 70 mm.
