List of products by brand Z-SPARS
Since 2010, Graphic Corner offers a large choice of quality posters, available on paper and many other formats.
Z-SPARS - 140 X 45 MM...
Z-SPARS Aluminium cover for the mast ( 140 X 45 mm)
Z-SPARS Aluminium cover for the mast ( 140 X 45 mm)
Z-SPARS - ANODISED PROFILE...
Anodized aluminum profile for Z180 spreader type. Sold by the meter. Z180 spreader profile dimensions: Outside measurements: 93mm x 40mm Inside measurements: 86mm x 32mm Wall thickness: 3mm Z180 spreaders can not be tapered
Anodized aluminum profile for Z180 spreader type. Sold by the meter. Z180 spreader profile dimensions: Outside measurements: 93mm x 40mm Inside measurements: 86mm x 32mm Wall thickness: 3mm Z180 spreaders can not be tapered
Z-SPARS - ANODISED PROFILE...
Anodized aluminum profile for Z240 spreader type. Sold by the meter. Z240 spreader profile dimensions: Outside Measurements (Untapered): 130mm x 40mm Inside Measurements: 86mm x 32mm Wall thickness: 3mm Weight/M.: 2.4kg The Z240 spreader section features an integral "tail", so that the...
Anodized aluminum profile for Z240 spreader type. Sold by the meter. Z240 spreader profile dimensions: Outside Measurements (Untapered): 130mm x 40mm Inside Measurements: 86mm x 32mm Wall thickness: 3mm Weight/M.: 2.4kg The Z240 spreader section features an integral "tail", so that the...
Z-SPARS - ANODISED PROFILE...
Anodized aluminum profile for Z341 spreader type. Sold by the meter. Z341 spreader dimensions: 155 × 49 mm
Anodized aluminum profile for Z341 spreader type. Sold by the meter. Z341 spreader dimensions: 155 × 49 mm
Z-SPARS - ANODISED PROFILE...
Anodized aluminum profile for Z362 boom type. Sold by the meter. Z362 boom profile dimensions: Outside Measurements: 140mm x 95mm Wall thickness: 2,60 mm Weight/M.: 3,64 kg
Anodized aluminum profile for Z362 boom type. Sold by the meter. Z362 boom profile dimensions: Outside Measurements: 140mm x 95mm Wall thickness: 2,60 mm Weight/M.: 3,64 kg
Z-SPARS - ANODISED PROFILE...
Anodized aluminum profile for Z482 boom type. Sold by the meter. Z482 boom profile dimensions: Outside Measurements: 190mm x 101mm Wall thickness: 3,60 mm Weight/M.: 5,21 kg
Anodized aluminum profile for Z482 boom type. Sold by the meter. Z482 boom profile dimensions: Outside Measurements: 190mm x 101mm Wall thickness: 3,60 mm Weight/M.: 5,21 kg
Z-SPARS - ANODISED PROFILE...
Anodized aluminum profile for Z95 spreader type. Sold by the meter. Z95 spreader profile dimensions: Outside measurements (untapered): 80mm x 25mm Inside measurements: 52mm x 17mm Wall thickness: 2mm Weight/m.: 1.25kg The Z95 spreader section features an integral "tail", so that the spreaders...
Anodized aluminum profile for Z95 spreader type. Sold by the meter. Z95 spreader profile dimensions: Outside measurements (untapered): 80mm x 25mm Inside measurements: 52mm x 17mm Wall thickness: 2mm Weight/m.: 1.25kg The Z95 spreader section features an integral "tail", so that the spreaders...
Z-SPARS - BACKING MAST...
Backing cap for the mast (10/12mm wire)
Backing cap for the mast (10/12mm wire)
Z-SPARS - BACKING MAST...
Backing cap for ZSpars the mast for 4-5mm wire with ball end.
Backing cap for ZSpars the mast for 4-5mm wire with ball end.
Z-SPARS - BACKING MAST...
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Z-SPARS - BACKING MAST...
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Z-SPARS - BALL BEARING...
Large ball bearing module. Large ring outer dimension - 80 mm, small ring inner dimension - 60 mm (44 balls available).
Large ball bearing module. Large ring outer dimension - 80 mm, small ring inner dimension - 60 mm (44 balls available).
Z-SPARS - BALL BEARING...
Small ball bearing module. Large ring outer dimension - 63 mm, small ring inner dimension - 44 mm (33 bearings).
Small ball bearing module. Large ring outer dimension - 63 mm, small ring inner dimension - 44 mm (33 bearings).
Z-SPARS - BATTEN CAR BODY...
Batten car body for mainsail. Ball bearings are not included. 34 ball bearings are required (product code 4515)
Batten car body for mainsail. Ball bearings are not included. 34 ball bearings are required (product code 4515)
Z-SPARS - BATTEN CAR WITH...
New-style batten car for use with masts using Z-Spar RCB 25 mm Track. The car incorporates a fully articulating stainless steel toggle with 10 mm stainless steel threaded stud (22mm thread) for batten attachment. Car rides on torlon slide rods to provide high strength and low friction, and will...
New-style batten car for use with masts using Z-Spar RCB 25 mm Track. The car incorporates a fully articulating stainless steel toggle with 10 mm stainless steel threaded stud (22mm thread) for batten attachment. Car rides on torlon slide rods to provide high strength and low friction, and will...
Z-SPARS - BATTEN CAR WITH...
Mainsail batten car with ball bearings (compatible with 32mm track)
Mainsail batten car with ball bearings (compatible with 32mm track)
Z-SPARS - BOOM BAIL SLIDER...
Stainless steel articulating boom bail fits in the integral track on the underside of Z160, Z204, and other boom sections with a 20mm wide track. Bail is made from 7mm rod. The formed plate is 2mm thick and measures 80mm long x 20mm wide. Fastens with 5mm rivets.
Stainless steel articulating boom bail fits in the integral track on the underside of Z160, Z204, and other boom sections with a 20mm wide track. Bail is made from 7mm rod. The formed plate is 2mm thick and measures 80mm long x 20mm wide. Fastens with 5mm rivets.
Z-SPARS - BOOM BAIL SLIDER...
Stainless steel articulating boom bail fits in the integral track on the underside of Z360-Z480, and other boom sections with a 30mm wide track. Bail is made from 10 mm rod. The formed plate is 2,5 mm thick and measures 120 mm long x 30 mm wide. Fastens with 5mm rivets.
Stainless steel articulating boom bail fits in the integral track on the underside of Z360-Z480, and other boom sections with a 30mm wide track. Bail is made from 10 mm rod. The formed plate is 2,5 mm thick and measures 120 mm long x 30 mm wide. Fastens with 5mm rivets.
Z-SPARS - BOOM CAR BALL...
Z-SPARS Small size car for Boom, for 25mm rail (compatible with Z160/204/360 booms)
Z-SPARS Small size car for Boom, for 25mm rail (compatible with Z160/204/360 booms)
Z-SPARS - BOOM OUTHAUL CAR...
Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z690 booms) Large size / Rod bearings / Suitable for 25 mm track
Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z690 booms) Large size / Rod bearings / Suitable for 25 mm track
Z-SPARS - BOOM OUTHAUL CAR...
Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z482 booms) Medium size / Rod bearings / Maximum outhaul rope diameter 10 mm
Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z482 booms) Medium size / Rod bearings / Maximum outhaul rope diameter 10 mm
Z-SPARS - BOOM TRACK 25/5...
Z-SPARS Track for 25-5 mm boom (per meter)
Z-SPARS Track for 25-5 mm boom (per meter)
Z-SPARS - BOOM TRACK END
Track end for 25 mm track Material: Composite
Track end for 25 mm track Material: Composite
Z-SPARS - BOWSPRIT DELTA...
This plate is mounted at the end of the bowsprit. Support wires attached to the hull of the boat can be fixed to the ends of the plate
This plate is mounted at the end of the bowsprit. Support wires attached to the hull of the boat can be fixed to the ends of the plate
Z-SPARS - BOWSPRIT DELTA...
This plate is installed at the end of the bowsprit. The support wires, which are attached to the hull of the boat, can be fixed to its ends.
This plate is installed at the end of the bowsprit. The support wires, which are attached to the hull of the boat, can be fixed to its ends.
Z-SPARS - CLEAT 120 MM PLASTIC
Plastic cleat for the mast Color : Gray Length : 120 mm Width : 20 mm Height : 18 mm
Plastic cleat for the mast Color : Gray Length : 120 mm Width : 20 mm Height : 18 mm
Z-SPARS - CLEAT 170 MM PLASTIC
Plastic cleat for the mast Color : Gray Length : 170 mm Width : 25 mm Height : 23 mm
Plastic cleat for the mast Color : Gray Length : 170 mm Width : 25 mm Height : 23 mm
Z-SPARS - DERLIN SHEAVE...
Derlin sheave with ball bearing (Ø 60 mm X 16 mm, pin Ø 8 mm)
Derlin sheave with ball bearing (Ø 60 mm X 16 mm, pin Ø 8 mm)
Z-SPARS - FAIRLEAD
Rope fairles. Hole center spacings are 40 mm and 70 mm.
Rope fairles. Hole center spacings are 40 mm and 70 mm.
Z-SPARS - GOOSENECK...
Boom gooseneck for the mast (suitable for Z362-482 boom and Z602, 702, 902 masts)
Boom gooseneck for the mast (suitable for Z362-482 boom and Z602, 702, 902 masts)
- Out-of-Stock
Z-SPARS - GOOSENECK TOGGLE...
Gooseneck toggle for 14mm Vertical Pin: Z-1187: Heavy cast aluminum gooseneck toggle rides on a 14mm vertical pin. Toggle is 1 5/8" (41mm) wide at boom end with 14mm hole for horizontal pin. Toggle measures 3 1/8" (80mm) vertical x 3 1/2" (90mm) horizontal x (maximum) 1 5/8" wide. Used for Z601...
Gooseneck toggle for 14mm Vertical Pin: Z-1187: Heavy cast aluminum gooseneck toggle rides on a 14mm vertical pin. Toggle is 1 5/8" (41mm) wide at boom end with 14mm hole for horizontal pin. Toggle measures 3 1/8" (80mm) vertical x 3 1/2" (90mm) horizontal x (maximum) 1 5/8" wide. Used for Z601...
Z-SPARS - GOOSENECK TOGGLE...
Special Gooseneck Toggle is modified to attach any Z204 & Z360 Booms and Isomat/Sparcraft NG1-11 Gooseneck Brackets. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin and is 18mm (3/4") wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below,...
Special Gooseneck Toggle is modified to attach any Z204 & Z360 Booms and Isomat/Sparcraft NG1-11 Gooseneck Brackets. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin and is 18mm (3/4") wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below,...
Z-SPARS - GOOSENECK TOGGLE...
Gooseneck toggle for Z480 boom. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 1 1/4" (31mm) wide with 10mm hole for horizontal pin, 6mm hole for special tack shackle and can be used with double Reef Hook. Portion that fits in Gooseneck Bracket is 3" (75mm) high, Toggle...
Gooseneck toggle for Z480 boom. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 1 1/4" (31mm) wide with 10mm hole for horizontal pin, 6mm hole for special tack shackle and can be used with double Reef Hook. Portion that fits in Gooseneck Bracket is 3" (75mm) high, Toggle...
Z-SPARS - HALYARD EXIT...
Plastic halyard exit plate, visible when installed, (135 x 30 mm), and will handle a line up to 13 mm in diameter. The cast plate fits in the mast cutout 96mm long x 20mm wide and fastens with a 5 mm rivet.
Plastic halyard exit plate, visible when installed, (135 x 30 mm), and will handle a line up to 13 mm in diameter. The cast plate fits in the mast cutout 96mm long x 20mm wide and fastens with a 5 mm rivet.
Z-SPARS - HALYARD EXIT...
Stainless steel halyard exit plate (144 x 32mm) and will handle a line up to 18 mm in diameter. The cast plate fits in the mast cutout 112 mm high x 23mm wide and fastens with 5mm rivet.
Stainless steel halyard exit plate (144 x 32mm) and will handle a line up to 18 mm in diameter. The cast plate fits in the mast cutout 112 mm high x 23mm wide and fastens with 5mm rivet.
Z-SPARS - HALYARD EXIT...
Stainless steel halyard exit plate (96 x 18mm) and will handle a line up to 9mm in diameter. The cast plate fits in the mast cutout 64 mm high x 13mm wide and fastens with a 5mm rivet.
Stainless steel halyard exit plate (96 x 18mm) and will handle a line up to 9mm in diameter. The cast plate fits in the mast cutout 64 mm high x 13mm wide and fastens with a 5mm rivet.
Z-SPARS - HALYARD SWIVEL...
The halyard swivel D-shackle assembly, designed for secure halyard connections and smooth sail handling. Manufactured from high-quality marine-grade stainless steel, this shackle offers excellent corrosion resistance and long-term durability, even in harsh saltwater environments.
The halyard swivel D-shackle assembly, designed for secure halyard connections and smooth sail handling. Manufactured from high-quality marine-grade stainless steel, this shackle offers excellent corrosion resistance and long-term durability, even in harsh saltwater environments.
Z-SPARS - INTERMEDIATE CAR...
İntermediate car body for mainsail. Ball bearings are not included
İntermediate car body for mainsail. Ball bearings are not included