For Sparcraft S980E furling masts – internal furling rod, Ø34 mm diameter, 19 meters in length, anodized, with machined sail gate (price is indicated per meter).
For Sparcraft S980E furling masts – internal furling rod, Ø34 mm diameter, 19 meters in length, anodized, with machined sail gate (price is indicated per meter).
SPARCRAFT - DERLIN PAD FOR SLIDER TRACK Ø 32 x 5.5 Length: 89 mm
SPARCRAFT - DERLIN PAD FOR SLIDER TRACK Ø 32 x 5.5 Length: 89 mm
Stainless steel boot clamp, 14 mm, for mast boot Material: Stainless steel (inox)
Stainless steel boot clamp, 14 mm, for mast boot Material: Stainless steel (inox)
SPARCRAFT - ACCESS DOOR FOR IN-MAST FURLING MAST (S1420E) Length: 29 cm
SPARCRAFT - ACCESS DOOR FOR IN-MAST FURLING MAST (S1420E) Length: 29 cm
Complete Stay AttachmentInstallation on the Mast (in two parts) Wire Ø 8 mm Hole Ø 14.5 mm Material: Stainless Steel
Complete Stay AttachmentInstallation on the Mast (in two parts) Wire Ø 8 mm Hole Ø 14.5 mm Material: Stainless Steel
BF3 CONTINUOUS SPREADER TIP (TAPERED) Max.wire : 8 mm Dimension: X - 10.5 mm Screw not included
BF3 CONTINUOUS SPREADER TIP (TAPERED) Max.wire : 8 mm Dimension: X - 10.5 mm Screw not included
BF3 CONTINUOUS SPREADER TIP (NOT TAPERED) Max.wire : 8 mm Dimension: X - 10.5 mm Screw not included
BF3 CONTINUOUS SPREADER TIP (NOT TAPERED) Max.wire : 8 mm Dimension: X - 10.5 mm Screw not included
BF3 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 8 mm / V2 - 7 mmDimension: X - 55 mm / y - 20 mm Pin: 12 mm Supplied with: split pin, screw, and self-locking nut
BF3 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 8 mm / V2 - 7 mmDimension: X - 55 mm / y - 20 mm Pin: 12 mm Supplied with: split pin, screw, and self-locking nut
BF3 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 8 mm / V2 - 7 mmDimension: X - 55 mm / y - 20 mm Pin: 14 mm Supplied with: split pin, screw, and self-locking nut
BF3 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 8 mm / V2 - 7 mmDimension: X - 55 mm / y - 20 mm Pin: 14 mm Supplied with: split pin, screw, and self-locking nut
BF3 SPREADER SECTION ANODIZED External dimensions: 32x75mm Internal dimensions: 22 x 53mm
BF3 SPREADER SECTION ANODIZED External dimensions: 32x75mm Internal dimensions: 22 x 53mm
BF4 CONTINUOUS SPREADER TIP (TAPERED) Max.wire : 10 mm Dimension: X 14 mm Supplied with: 1 screws
BF4 CONTINUOUS SPREADER TIP (TAPERED) Max.wire : 10 mm Dimension: X 14 mm Supplied with: 1 screws
BF4 CONTINUOUS SPREADER TIP (NOT TAPERED) Max.wire : 10 mm Dimension: X 14 mm Supplied with: 2 screws
BF4 CONTINUOUS SPREADER TIP (NOT TAPERED) Max.wire : 10 mm Dimension: X 14 mm Supplied with: 2 screws
BF4 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 10 mm / V2 - 8 mmDimension: X - 62 mm / y - 20 mm Pin: 14 mm Supplied with: split pin, screw, and self-locking nut
BF4 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 10 mm / V2 - 8 mmDimension: X - 62 mm / y - 20 mm Pin: 14 mm Supplied with: split pin, screw, and self-locking nut
BF4 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 10 mm / V2 - 8 mmDimension: X - 62 mm / y - 20 mm Pin: 16 mm Supplied with: split pin, screw, and self-locking nut
BF4 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 10 mm / V2 - 8 mmDimension: X - 62 mm / y - 20 mm Pin: 16 mm Supplied with: split pin, screw, and self-locking nut
BF4 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 10 mm / V2 - 8 mmDimension: X - 62 mm / y - 20 mm Pin: 18 mm Supplied with: split pin, screw, and self-locking nut
BF4 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 10 mm / V2 - 8 mmDimension: X - 62 mm / y - 20 mm Pin: 18 mm Supplied with: split pin, screw, and self-locking nut
BF4 SPREADER SECTION ANODIZED External dimensions: 37 x 106 mm Internal dimensions: 27 x 72 mm
BF4 SPREADER SECTION ANODIZED External dimensions: 37 x 106 mm Internal dimensions: 27 x 72 mm
BF5 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 12 mm / V2 - 10 mmDimension: X - 69 mm / y - 20 mm Pin: 18 mm Supplied with: split pin, screw, and self-locking nut
BF5 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 12 mm / V2 - 10 mmDimension: X - 69 mm / y - 20 mm Pin: 18 mm Supplied with: split pin, screw, and self-locking nut
BF5 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 14 mm / V2 - 12 mmDimension: X - 69 mm / y - 20 mm Pin: 20 mm Supplied with: split pin, screw, and self-locking nut
BF5 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 14 mm / V2 - 12 mmDimension: X - 69 mm / y - 20 mm Pin: 20 mm Supplied with: split pin, screw, and self-locking nut
BF5 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 14 mm / V2 - 12 mmDimension: X - 69 mm / y - 20 mm Pin: 22 mm Supplied with: split pin, screw, and self-locking nut
BF5 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 14 mm / V2 - 12 mmDimension: X - 69 mm / y - 20 mm Pin: 22 mm Supplied with: split pin, screw, and self-locking nut
BF5 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 16 mm / V2 - 14 mmDimension: X - 69 mm / y - 20 mm Pin: 25 mm Supplied with: split pin, screw, and self-locking nut
BF5 DISCONTINUOUS SPREADER TIP Max.wire : V1 - 16 mm / V2 - 14 mmDimension: X - 69 mm / y - 20 mm Pin: 25 mm Supplied with: split pin, screw, and self-locking nut
BF4 SPREADER SECTION ANODIZED External dimensions: 37 x 106 mm Internal dimensions: 27 x 72 mm
BF4 SPREADER SECTION ANODIZED External dimensions: 37 x 106 mm Internal dimensions: 27 x 72 mm
Sparcraft FB-810 Boom Section Dimensions (External): 225 mm × 122 mm Wall thickness: 2.8 mm Circumference: 616 mm Standard length: 6.50 m (price is given per meter) The FB-810 Boom Section is fully anodized and stocked in various lengths.
Sparcraft FB-810 Boom Section Dimensions (External): 225 mm × 122 mm Wall thickness: 2.8 mm Circumference: 616 mm Standard length: 6.50 m (price is given per meter) The FB-810 Boom Section is fully anodized and stocked in various lengths.
Sparcraft FB-220 Boom Section Dimensions (External): 130 mm × 98 mm Wall thickness: 2.4 mm Circumference: 402 mm Standard lengths: 4.8 m (price is given per meter) The FB-220 Boom Section is fully anodized and stocked in various lengths.
Sparcraft FB-220 Boom Section Dimensions (External): 130 mm × 98 mm Wall thickness: 2.4 mm Circumference: 402 mm Standard lengths: 4.8 m (price is given per meter) The FB-220 Boom Section is fully anodized and stocked in various lengths.
Sparcraft FB-550 Boom Section Dimensions (External): 160 mm × 98 mm Wall thickness: 2.6 mm Circumference: 461 mm Standard length: 6.10 m (price is given per meter) The FB-550 Boom Section is fully anodized and stocked in various lengths.
Sparcraft FB-550 Boom Section Dimensions (External): 160 mm × 98 mm Wall thickness: 2.6 mm Circumference: 461 mm Standard length: 6.10 m (price is given per meter) The FB-550 Boom Section is fully anodized and stocked in various lengths.
Sparcraft FB-810 Boom Section Dimensions (External): 190 mm × 121 mm Wall thickness: 2.6 mm Circumference: 548 mm Standard length: 6.40 m (price is given per meter) The FB-810 Boom Section is fully anodized and stocked in various lengths.
Sparcraft FB-810 Boom Section Dimensions (External): 190 mm × 121 mm Wall thickness: 2.6 mm Circumference: 548 mm Standard length: 6.40 m (price is given per meter) The FB-810 Boom Section is fully anodized and stocked in various lengths.
Clamping ring head 14 mm for mast coat Material : inox
Clamping ring head 14 mm for mast coat Material : inox
Length: 170mm. Material: Anodized aluminium Mast profile: > S622 / S760E – S830 / S980E Installation: Use 2 pcs M6x25 screws (not included)
Length: 170mm. Material: Anodized aluminium Mast profile: > S622 / S760E – S830 / S980E Installation: Use 2 pcs M6x25 screws (not included)
Spinnaker pole - Up and down system. Including : - Complete slider 33503000004 - Toggle 33517179380 - Complete bell 33505000007
Spinnaker pole - Up and down system. Including : - Complete slider 33503000004 - Toggle 33517179380 - Complete bell 33505000007
Complete Stay AttachmentInstallation on the Mast Wire Ø 6 / 7 / 8 mm Hole Ø 13 mm Material: Stainless Steel
Complete Stay AttachmentInstallation on the Mast Wire Ø 6 / 7 / 8 mm Hole Ø 13 mm Material: Stainless Steel
Complete Stay AttachmentInstallation on the Mast Wire Ø 10 mm Hole Ø 16.2 mm Material: Stainless Steel
Complete Stay AttachmentInstallation on the Mast Wire Ø 10 mm Hole Ø 16.2 mm Material: Stainless Steel
Complete Stay AttachmentInstallation on the Mast Wire Ø 19.4 mm Hole Ø 12 / 12.7 mm Material: Stainless Steel
Complete Stay AttachmentInstallation on the Mast Wire Ø 19.4 mm Hole Ø 12 / 12.7 mm Material: Stainless Steel
Complete Stay AttachmentInstallation on the Mast Wire Ø 14 mm Hole Ø 23 mm Material: Stainless Steel
Complete Stay AttachmentInstallation on the Mast Wire Ø 14 mm Hole Ø 23 mm Material: Stainless Steel
Complete Halyard Exit Model: Ø 12 mm Maximum halyard diameter: Ø 10 mm Exit dimensions (A × D × E): 121.5 × 25 × 14 mm Cut-out dimensions (G × H): 95 × 18.3 mm Rivet included Rivet size: 4.8 × 14 mm Compatible mast sections: S80 – S265E to S622 – S560E Material: stainless steel
Complete Halyard Exit Model: Ø 12 mm Maximum halyard diameter: Ø 10 mm Exit dimensions (A × D × E): 121.5 × 25 × 14 mm Cut-out dimensions (G × H): 95 × 18.3 mm Rivet included Rivet size: 4.8 × 14 mm Compatible mast sections: S80 – S265E to S622 – S560E Material: stainless steel
Complete Halyard Exit Version Model: Ø 18 mm Max halyard diameter: Ø 14 mm Exit dimensions (A x D x E): 143.5 × 32 × 18 mm Cut-out dimensions (G x H): 116 × 23 mm Rivet included Rivet size: 4.8 × 14 mm Mast profiles: S622 – S760E to S3410 – S3800E Material: stainless steel
Complete Halyard Exit Version Model: Ø 18 mm Max halyard diameter: Ø 14 mm Exit dimensions (A x D x E): 143.5 × 32 × 18 mm Cut-out dimensions (G x H): 116 × 23 mm Rivet included Rivet size: 4.8 × 14 mm Mast profiles: S622 – S760E to S3410 – S3800E Material: stainless steel
SHEAVE BLOCK (DERLIN) Outher diameter: Ø85 mm Width: 15,8 mm Hole diameter: Ø12,2 mm Ø max adviced halyard : 12 mm Material : injected Delrin Color : black The sheaves have been chosen after a series of software, chemical, and mechanical tests, ensuring their durability.
SHEAVE BLOCK (DERLIN) Outher diameter: Ø85 mm Width: 15,8 mm Hole diameter: Ø12,2 mm Ø max adviced halyard : 12 mm Material : injected Delrin Color : black The sheaves have been chosen after a series of software, chemical, and mechanical tests, ensuring their durability.
Medium model lead For sections: S180 – S260 – S265 E – S330 – S400 – S510 – S560E – S622 – S760E – S830 – S1170 For booms: F810 & F1700 Interior diameter: Ø 17.6 mm Rope diameter: Ø 12–14–16 mm Material: polished stainless steel Use for: Spinnaker (spi spectacles), Gennaker, Continuous...
Medium model lead For sections: S180 – S260 – S265 E – S330 – S400 – S510 – S560E – S622 – S760E – S830 – S1170 For booms: F810 & F1700 Interior diameter: Ø 17.6 mm Rope diameter: Ø 12–14–16 mm Material: polished stainless steel Use for: Spinnaker (spi spectacles), Gennaker, Continuous...
Lead small model in two parts For sections : S80 - S137 - S260 Interior diameter (A) : Ø 12 mm Rope diameter : Ø 5-6-7-8-10 mm Material : polished stainless steel Use for: Spinnaker (spi spectacles), Gennaker, Single line reefing, Mainsheet system
Lead small model in two parts For sections : S80 - S137 - S260 Interior diameter (A) : Ø 12 mm Rope diameter : Ø 5-6-7-8-10 mm Material : polished stainless steel Use for: Spinnaker (spi spectacles), Gennaker, Single line reefing, Mainsheet system
For mast sections S330 and Isomat NG46 / NG51 / NG60 Dimensions: Top circumference: 490 mm Bottom circumference: 650 mm Height: 100 mm Boot clamp and clamping ring head are not included.
For mast sections S330 and Isomat NG46 / NG51 / NG60 Dimensions: Top circumference: 490 mm Bottom circumference: 650 mm Height: 100 mm Boot clamp and clamping ring head are not included.
For mast sections S385 and S460 Perimeter : 420 mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S385 and S460 Perimeter : 420 mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S460 and S580 Dimensions: Top circumference: 600mm Bottom circumference: 850mm Height: 120mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S460 and S580 Dimensions: Top circumference: 600mm Bottom circumference: 850mm Height: 120mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S580 and S622 Dimensions: Top circumference: 630mm Bottom circumference: 840mm Height: 185mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S580 and S622 Dimensions: Top circumference: 630mm Bottom circumference: 840mm Height: 185mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S740E and S830 Perimeter : 620 mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S740E and S830 Perimeter : 620 mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S980E - S1060 - S1210 - S1395 Perimeter : 750 mm Material : elastomer Boot clamp and clamping ring head are not included.
For mast sections S980E - S1060 - S1210 - S1395 Perimeter : 750 mm Material : elastomer Boot clamp and clamping ring head are not included.
SPARCRAFT - PLASTIC GUARD FOR IN-MAST FURLING MAST Length: 32,50 cm
SPARCRAFT - PLASTIC GUARD FOR IN-MAST FURLING MAST Length: 32,50 cm
SHEAVE BLOCK (DERLIN) Outher diameter: Ø85mm Width: 15mm Hole diameter: Ø12,4mm New model! Replaces former items: 48510801525 (Ø80x15x12), 48530851515 (Ø85xW15xØ22) and 48685152200
SHEAVE BLOCK (DERLIN) Outher diameter: Ø85mm Width: 15mm Hole diameter: Ø12,4mm New model! Replaces former items: 48510801525 (Ø80x15x12), 48530851515 (Ø85xW15xØ22) and 48685152200
S/S SHEAVE BOX Working load: 1350 daNMaximum rope diameter: Ø 8 mmMaterial: stainless steel Dimensions: 118.5 × 23 × 95.5 mmCut-out size: 57 × 19 mm
S/S SHEAVE BOX Working load: 1350 daNMaximum rope diameter: Ø 8 mmMaterial: stainless steel Dimensions: 118.5 × 23 × 95.5 mmCut-out size: 57 × 19 mm
S/S SHEAVE BOX Fitting with rivets Diameter : Ø 60 mm Dimensions : 165.5 x 29 x 136.5 mm Cut : 83 x 26 mm Work load max : 1800 daN Max rope : Ø 12 mm Material : stainless steel + Delrin milled
S/S SHEAVE BOX Fitting with rivets Diameter : Ø 60 mm Dimensions : 165.5 x 29 x 136.5 mm Cut : 83 x 26 mm Work load max : 1800 daN Max rope : Ø 12 mm Material : stainless steel + Delrin milled
S/S SHEAVE BOX Fitting with rivets Diameter : Ø 85 mm Dimensions : 196 x 34 x 162 mm Cut : 108 x 30 mm Work load max : 2300 daN Max rope : Ø 14 mm Material : stainless steel + Delrin milled
S/S SHEAVE BOX Fitting with rivets Diameter : Ø 85 mm Dimensions : 196 x 34 x 162 mm Cut : 108 x 30 mm Work load max : 2300 daN Max rope : Ø 14 mm Material : stainless steel + Delrin milled
