Home (2)

0

Z-SPARS - INTERMEDIATE CAR...

Ball bearing intermediate car for use with masts using Z-Spar RCB 25 mm track. The car incorporates delrin spool for attachment to the sail with webbing. Car rides on torlon ball bearings to provide high strength and low friction at a minimum weight. Short cars allow reduced stack height. The car...

€300.24

0

Z-SPARS - BATTEN CAR WITH...

New-style batten car for use with masts using Z-Spar RCB 25 mm Track. The car incorporates a fully articulating stainless steel toggle with 10 mm stainless steel threaded stud (22mm thread) for batten attachment. Car rides on torlon slide rods to provide high strength and low friction, and will...

€303.11

0

Z-SPARS - SPREADER TIP END...

Gray plastic spreader tip for use with the tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum of 87 mm long x 55 mm wide.

€48.87

0

Z-SPARS - SPREADER TIP END...

Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...

€51.92

0

Z-SPARS - BOOM OUTHAUL CAR...

Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z482 booms) Medium size / Rod bearings / Maximum outhaul rope diameter 10 mm

€338.40

0

Z-SPARS - SHEAVE BOX LARGE,...

Large rope sheave box for the mast, alıuminum (Ø110 mm)

€253.31

0

Z-SPARS - BACKING MAST...

Backing cap for ZSpars the mast for 4-5mm wire with ball end.

€33.64

0

Z-SPARS - BACKING MAST...

Backing cap for ZSpars the mast for 7-8mm wire with ball end

€51.87

0

Z-SPARS - BACKING MAST...

Backing cap for ZSpars the mast for 7-8mm wire with ball end

€42.85

0

ZSPARS - ROD SLIDES (133 MM...

Teflon rod set for the mainsail outhaul car. Replaces ball bearings, 7.9 mm diameter, 133 mm length (fits 3074 boom car, comes in a pack of 2)

€68.99

0

Z-SPARS -Spreader bar Z240...

€161.03

Out-of-Stock

0

Z-SPARS - DERLIN SHEAVE...

Derlin sheave with ball bearing (Ø 60 mm X 16 mm, pin Ø 8 mm)

€83.46

0

ALUMINIUM SHEAVE BOX...

€84.80

0

Z-SPARS - MAINSHEET BOOM...

Stainless steel articulating mainsheet boom bail fits in the integral track on the underside of Z690-Z692, and other boom sections Bail is made from 10 mm rod. The bail is a formed plate that is 3 mm thick and measures 140 mm long x 34 mm wide. Fastens with 5mm rivets.

€133.20

0

Z-SPARS - BATTEN CAR WITH...

Mainsail batten car with ball bearings (compatible with 32mm track)

€635.58

0

Z-SPARS - PLASTIC...

Replacement plastic worm drive for the sail furling mechanism. Used together with furling line to furl or unfurl the mainsail manually or mechanically. Made of durable marine‑grade plastic with high wear resistance, designed to handle the loads from the worm mechanism, ensuring smooth...

€595.58