Filter By
Categories
TYPE :
Availability
Brand
Price
Home
Z-SPARS - LARGE BOOM VANG...
Vang hold load: 500 kg /1000 lbs Range of vang: 150 mm Compatible with: Z482 & Z692 Fork Gap: 28 mm/ 1 inch Connecting Pin Size: 12 mm Pin to pin length: 2240 mm Weight: 9,3 kg Boom tang: assembly 3456 Mast tang: assembly 3811
Vang hold load: 500 kg /1000 lbs Range of vang: 150 mm Compatible with: Z482 & Z692 Fork Gap: 28 mm/ 1 inch Connecting Pin Size: 12 mm Pin to pin length: 2240 mm Weight: 9,3 kg Boom tang: assembly 3456 Mast tang: assembly 3811
Z-SPARS - GOOSENECK TOGGLE...
Special Gooseneck Toggle is modified to attach any Z204 & Z360 Booms and Isomat/Sparcraft NG1-11 Gooseneck Brackets. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin and is 18mm (3/4") wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below,...
Special Gooseneck Toggle is modified to attach any Z204 & Z360 Booms and Isomat/Sparcraft NG1-11 Gooseneck Brackets. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin and is 18mm (3/4") wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below,...
Z-SPARS - GOOSENECK TOGGLE...
Gooseneck toggle for 14mm Vertical Pin: Z-1187: Heavy cast aluminum gooseneck toggle rides on a 14mm vertical pin. Toggle is 1 5/8" (41mm) wide at boom end with 14mm hole for horizontal pin. Toggle measures 3 1/8" (80mm) vertical x 3 1/2" (90mm) horizontal x (maximum) 1 5/8" wide. Used for Z601...
Gooseneck toggle for 14mm Vertical Pin: Z-1187: Heavy cast aluminum gooseneck toggle rides on a 14mm vertical pin. Toggle is 1 5/8" (41mm) wide at boom end with 14mm hole for horizontal pin. Toggle measures 3 1/8" (80mm) vertical x 3 1/2" (90mm) horizontal x (maximum) 1 5/8" wide. Used for Z601...
Z-SPARS - SHEAVE BOX SMALL,...
Small rope sheave box for the mast, polyester (Ø60 mm)
Small rope sheave box for the mast, polyester (Ø60 mm)
Z-SPARS - BOWSPRIT DELTA...
This plate is installed at the end of the bowsprit. The support wires, which are attached to the hull of the boat, can be fixed to its ends.
This plate is installed at the end of the bowsprit. The support wires, which are attached to the hull of the boat, can be fixed to its ends.
Z-SPARS - GOOSENECK TOGGLE...
Gooseneck toggle for Z480 boom. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 1 1/4" (31mm) wide with 10mm hole for horizontal pin, 6mm hole for special tack shackle and can be used with double Reef Hook. Portion that fits in Gooseneck Bracket is 3" (75mm) high, Toggle...
Gooseneck toggle for Z480 boom. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 1 1/4" (31mm) wide with 10mm hole for horizontal pin, 6mm hole for special tack shackle and can be used with double Reef Hook. Portion that fits in Gooseneck Bracket is 3" (75mm) high, Toggle...
Z-SPARS - BACKING MAST...
Backing cap for the mast (10/12mm wire)
Backing cap for the mast (10/12mm wire)
Z-SPARS - GOOSENECK...
Boom gooseneck for the mast (suitable for Z362-482 boom and Z602, 702, 902 masts)
Boom gooseneck for the mast (suitable for Z362-482 boom and Z602, 702, 902 masts)
Z-SPARS - OUTBOARD BOOM END...
This cover is designed for the Z362 boom series and covers the reef's sheave blocks located inside the boom.
This cover is designed for the Z362 boom series and covers the reef's sheave blocks located inside the boom.
Z-SPARS - TOGGLE MAST STEP...
Block stud assembly with wide toggle and nut, to fit Z-Spars steps and collars with 10mm holes and 17mm wide slots for nuts. Stainless steel nut slides into recess in side of deck casting, toggle screw threads in through hole in top. Articulating wide toggle has an 18 mm and an 8mm clevis pin.
Block stud assembly with wide toggle and nut, to fit Z-Spars steps and collars with 10mm holes and 17mm wide slots for nuts. Stainless steel nut slides into recess in side of deck casting, toggle screw threads in through hole in top. Articulating wide toggle has an 18 mm and an 8mm clevis pin.
Z-SPARS - INTERMEDIATE CAR...
Intermediate car for mainsail. Compatible with 25 mm track. The car's length is 58 mm.
Intermediate car for mainsail. Compatible with 25 mm track. The car's length is 58 mm.
Z-SPARS - SPINNAKER POLE...
This eye bracket is fixed to the mast with rivets and serves to attach one end of the spinnaker pole to the mast. Material: Stainless steel
This eye bracket is fixed to the mast with rivets and serves to attach one end of the spinnaker pole to the mast. Material: Stainless steel