Home

Z-SPARS - PLASTIC...

Replacement plastic worm drive for the sail furling mechanism. Used together with furling line to furl or unfurl the mainsail manually or mechanically. Made of durable marine‑grade plastic with high wear resistance, designed to handle the loads from the worm mechanism, ensuring smooth...

Replacement plastic worm drive for the sail furling mechanism. Used together with furling line to furl or unfurl the mainsail manually or mechanically. Made of durable marine‑grade plastic with high wear resistance, designed to handle the loads from the worm mechanism, ensuring smooth...

SPREADER END Z240 UNTAPERED...

Z-SPARS - BATTEN CAR BODY...

Batten car body for mainsail. Ball bearings are not included. 34 ball bearings are required (product code 4515)

Batten car body for mainsail. Ball bearings are not included. 34 ball bearings are required (product code 4515)

Z-SPARS - STEMBALL BACKING...

Backing cap for ZSpars the mast for 8-10mm wire with ball end

Backing cap for ZSpars the mast for 8-10mm wire with ball end

Z-SPARS - PLASTIC COVER FOR...

Z-SPARS Plastic cover for the mast ( 85 X 35 mm)

Z-SPARS Plastic cover for the mast ( 85 X 35 mm)

Z-SPARS - PLASTIC COVER FOR...

Z-SPARS Plastic cover for the mast ( 110 X 60 mm)

Z-SPARS Plastic cover for the mast ( 110 X 60 mm)

Z-SPARS - CLEAT 170 MM PLASTIC

Plastic cleat for the mast Color : Gray Length : 170 mm Width : 25 mm Height : 23 mm

Plastic cleat for the mast Color : Gray Length : 170 mm Width : 25 mm Height : 23 mm

Z-SPARS - CLEAT 120 MM PLASTIC

Plastic cleat for the mast Color : Gray Length : 120 mm Width : 20 mm Height : 18 mm

Plastic cleat for the mast Color : Gray Length : 120 mm Width : 20 mm Height : 18 mm

Headboard car body C25 2 D2930

Z-SPARS - INTERMEDIATE CAR...

İntermediate car body for mainsail. Ball bearings are not included

İntermediate car body for mainsail. Ball bearings are not included

Z-SPARS - LARGE BOOM VANG...

Vang hold load: 500  kg /1000 lbs Range of vang: 150 mm Compatible with: Z482 & Z692 Fork Gap: 28 mm/ 1 inch Connecting Pin Size: 12 mm Pin to pin length: 2240 mm Weight: 9,3 kg Boom tang: assembly 3456 Mast tang: assembly 3811

Vang hold load: 500  kg /1000 lbs Range of vang: 150 mm Compatible with: Z482 & Z692 Fork Gap: 28 mm/ 1 inch Connecting Pin Size: 12 mm Pin to pin length: 2240 mm Weight: 9,3 kg Boom tang: assembly 3456 Mast tang: assembly 3811

Z-SPARS - GOOSENECK TOGGLE...

Special Gooseneck Toggle is modified to attach any Z204 & Z360 Booms and Isomat/Sparcraft NG1-11 Gooseneck Brackets.  Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin and is 18mm (3/4") wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below,...

Special Gooseneck Toggle is modified to attach any Z204 & Z360 Booms and Isomat/Sparcraft NG1-11 Gooseneck Brackets.  Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin and is 18mm (3/4") wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below,...

Z-SPARS - GOOSENECK TOGGLE...

Gooseneck toggle for 14mm Vertical Pin: Z-1187:  Heavy cast aluminum gooseneck toggle rides on a 14mm vertical pin. Toggle is 1 5/8" (41mm) wide at boom end with 14mm hole for horizontal pin. Toggle measures 3 1/8" (80mm) vertical x 3 1/2" (90mm) horizontal x (maximum) 1 5/8" wide.  Used for Z601...

Gooseneck toggle for 14mm Vertical Pin: Z-1187:  Heavy cast aluminum gooseneck toggle rides on a 14mm vertical pin. Toggle is 1 5/8" (41mm) wide at boom end with 14mm hole for horizontal pin. Toggle measures 3 1/8" (80mm) vertical x 3 1/2" (90mm) horizontal x (maximum) 1 5/8" wide.  Used for Z601...

Z-SPARS - SHEAVE BOX SMALL,...

Small rope sheave box for the mast, polyester (Ø60 mm)

Small rope sheave box for the mast, polyester (Ø60 mm)

Z-SPARS - BOWSPRIT DELTA...

This plate is installed at the end of the bowsprit. The support wires, which are attached to the hull of the boat, can be fixed to its ends.

This plate is installed at the end of the bowsprit. The support wires, which are attached to the hull of the boat, can be fixed to its ends.

Z-SPARS - GOOSENECK TOGGLE...

Gooseneck toggle for Z480 boom. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 1 1/4" (31mm) wide with 10mm hole for horizontal pin, 6mm hole for special tack shackle and can be used with double Reef Hook. Portion that fits in Gooseneck Bracket is 3" (75mm) high, Toggle...

Gooseneck toggle for Z480 boom. Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 1 1/4" (31mm) wide with 10mm hole for horizontal pin, 6mm hole for special tack shackle and can be used with double Reef Hook. Portion that fits in Gooseneck Bracket is 3" (75mm) high, Toggle...

Z-SPARS - BACKING MAST...

Backing cap for the mast (10/12mm wire)

Backing cap for the mast (10/12mm wire)

Z-SPARS - GOOSENECK...

Boom gooseneck for the mast (suitable for Z362-482 boom and Z602, 702, 902 masts)

Boom gooseneck for the mast (suitable for Z362-482 boom and Z602, 702, 902 masts)

Z-SPARS - OUTBOARD BOOM END...

This cover is designed for the Z362 boom series and covers the reef's sheave blocks located inside the boom.

This cover is designed for the Z362 boom series and covers the reef's sheave blocks located inside the boom.

Z-SPARS - TOGGLE MAST STEP...

Block stud assembly with wide toggle and nut, to fit Z-Spars steps and collars with 10mm holes and 17mm wide slots for nuts. Stainless steel nut slides into recess in side of deck casting, toggle screw threads in through hole in top. Articulating wide toggle has an 18 mm and an 8mm clevis pin.

Block stud assembly with wide toggle and nut, to fit Z-Spars steps and collars with 10mm holes and 17mm wide slots for nuts. Stainless steel nut slides into recess in side of deck casting, toggle screw threads in through hole in top. Articulating wide toggle has an 18 mm and an 8mm clevis pin.

Z-SPARS - INTERMEDIATE CAR...

Intermediate car for mainsail. Compatible with 25 mm track. The car's length is 58 mm.

Intermediate car for mainsail. Compatible with 25 mm track. The car's length is 58 mm.

Z-SPARS - SPINNAKER POLE...

This eye bracket is fixed to the mast with rivets and serves to attach one end of the spinnaker pole to the mast. Material: Stainless steel

This eye bracket is fixed to the mast with rivets and serves to attach one end of the spinnaker pole to the mast. Material: Stainless steel

Z-SPARS - MAINSAIL ENTRY...

Plastic mainsail gate slide stop assembly fits Z-Spars Z301/701 mast sections. Sliding stop includes a 5 mm thumbscrew which locks into a hole drilled at the top of the gate cut-out. Slide stop is 85 mm long x 16 mm wide.

Plastic mainsail gate slide stop assembly fits Z-Spars Z301/701 mast sections. Sliding stop includes a 5 mm thumbscrew which locks into a hole drilled at the top of the gate cut-out. Slide stop is 85 mm long x 16 mm wide.

Z-SPARS - ANODISED PROFILE...

Anodized aluminum profile for Z95 spreader type. Sold by the meter. Z95 spreader profile dimensions: Outside measurements (untapered): 80mm x 25mm  Inside measurements: 52mm x 17mm  Wall thickness: 2mm Weight/m.: 1.25kg The Z95 spreader section features an integral "tail", so that the spreaders...

Anodized aluminum profile for Z95 spreader type. Sold by the meter. Z95 spreader profile dimensions: Outside measurements (untapered): 80mm x 25mm  Inside measurements: 52mm x 17mm  Wall thickness: 2mm Weight/m.: 1.25kg The Z95 spreader section features an integral "tail", so that the spreaders...

Z-SPARS - Z95 DISCONTINUOUS...

Aluminum spreader tip for use with the Z95 spreader.  The tip is a maximum of 105 mm long x 80 mm wide (pin 12/8).

Aluminum spreader tip for use with the Z95 spreader.  The tip is a maximum of 105 mm long x 80 mm wide (pin 12/8).

Z-SPARS - SPREADER TIP END...

Aluminum spreader tip for use with the Z240 spreader.  The tip is a maximum of 165 mm long x 130 mm wide (pin 12/16).

Aluminum spreader tip for use with the Z240 spreader.  The tip is a maximum of 165 mm long x 130 mm wide (pin 12/16).

Z-SPARS - BALL BEARING...

Small ball bearing module. Large ring outer dimension - 63 mm, small ring inner dimension - 44 mm (33 bearings).

Small ball bearing module. Large ring outer dimension - 63 mm, small ring inner dimension - 44 mm (33 bearings).

Z-SPARS - TOGGLE MAST STEP...

A block stud assembly with wide toggle and nut, to fit Z-Spars steps and collars with 10mm holes and 17mm wide slots for nuts. Stainless steel nut slides into recess in side of deck casting, toggle screw threads in through hole in top. Articulating wide toggle has a 24mm and an 8mm clevis pin.

A block stud assembly with wide toggle and nut, to fit Z-Spars steps and collars with 10mm holes and 17mm wide slots for nuts. Stainless steel nut slides into recess in side of deck casting, toggle screw threads in through hole in top. Articulating wide toggle has a 24mm and an 8mm clevis pin.

Z-SPARS - SPREADER TIP END...

Aluminum spreader tip for use with the Z240 spreader.  The tip is a maximum of 165 mm long x 130 mm wide (pin 12/19). 

Aluminum spreader tip for use with the Z240 spreader.  The tip is a maximum of 165 mm long x 130 mm wide (pin 12/19). 

Z-SPARS - SPINNAKER POLE...

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 4,50 meters.

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 4,50 meters.

Z-SPARS - SPRIT POLE BRACKET

A special bracket for attaching a bowsprit to a catamaran's crossbeam

A special bracket for attaching a bowsprit to a catamaran's crossbeam

Z-SPARS - BOWSPRIT DELTA...

This plate is mounted at the end of the bowsprit. Support wires attached to the hull of the boat can be fixed to the ends of the plate

This plate is mounted at the end of the bowsprit. Support wires attached to the hull of the boat can be fixed to the ends of the plate

Z-SPARS - SPREADER TIP END...

Gray plastic spreader tip for use with Z60 spreader. Includes 5mm J-bolt with locknut, Z-1480A, to clamp shroud to the spreader tip prior to installation in the spreader tube. The tip is a maximum 45 mm long x 24 mm wide.

Gray plastic spreader tip for use with Z60 spreader. Includes 5mm J-bolt with locknut, Z-1480A, to clamp shroud to the spreader tip prior to installation in the spreader tube. The tip is a maximum 45 mm long x 24 mm wide.

Z-SPARS - SPINNAKER POLE...

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6,8 meters.

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6,8 meters.

Z-SPARS - FAIRLEAD...

Fairlead for rope

Fairlead for rope

Z-SPARS - PROFILE BOOM Z692...

Z-SPARS - ANODISED PROFILE...

Anodized aluminum profile for Z341 spreader type. Sold by the meter. Z341 spreader dimensions: 155 × 49 mm

Anodized aluminum profile for Z341 spreader type. Sold by the meter. Z341 spreader dimensions: 155 × 49 mm

Z-SPARS - ANODISED PROFILE...

Anodized aluminum profile for Z180 spreader type. Sold by the meter. Z180 spreader profile dimensions: Outside measurements: 93mm x 40mm  Inside measurements: 86mm x 32mm Wall thickness: 3mm Z180 spreaders can not be tapered

Anodized aluminum profile for Z180 spreader type. Sold by the meter. Z180 spreader profile dimensions: Outside measurements: 93mm x 40mm  Inside measurements: 86mm x 32mm Wall thickness: 3mm Z180 spreaders can not be tapered

Z-SPARS - BALL BEARING...

Large ball bearing module. Large ring outer dimension - 80 mm, small ring inner dimension - 60 mm (44 balls available).

Large ball bearing module. Large ring outer dimension - 80 mm, small ring inner dimension - 60 mm (44 balls available).

Z-SPARS - ANODISED PROFILE...

Anodized aluminum profile for Z362 boom type. Sold by the meter. Z362 boom profile dimensions: Outside Measurements: 140mm x 95mm  Wall thickness: 2,60 mm Weight/M.: 3,64 kg

Anodized aluminum profile for Z362 boom type. Sold by the meter. Z362 boom profile dimensions: Outside Measurements: 140mm x 95mm  Wall thickness: 2,60 mm Weight/M.: 3,64 kg

Z-SPARS - ANODISED PROFILE...

Anodized aluminum profile for Z482 boom type. Sold by the meter. Z482 boom profile dimensions: Outside Measurements: 190mm x 101mm  Wall thickness: 3,60 mm Weight/M.: 5,21 kg

Anodized aluminum profile for Z482 boom type. Sold by the meter. Z482 boom profile dimensions: Outside Measurements: 190mm x 101mm  Wall thickness: 3,60 mm Weight/M.: 5,21 kg

Z-SPARS - ANODISED PROFILE...

Anodized aluminum profile for Z240 spreader type. Sold by the meter. Z240 spreader profile dimensions: Outside Measurements (Untapered): 130mm x 40mm  Inside Measurements: 86mm x 32mm  Wall thickness: 3mm Weight/M.: 2.4kg The Z240 spreader section features an integral "tail", so that the...

Anodized aluminum profile for Z240 spreader type. Sold by the meter. Z240 spreader profile dimensions: Outside Measurements (Untapered): 130mm x 40mm  Inside Measurements: 86mm x 32mm  Wall thickness: 3mm Weight/M.: 2.4kg The Z240 spreader section features an integral "tail", so that the...

Z-SPARS - BOOM TRACK 25/5...

Z-SPARS Track for 25-5 mm boom (per meter)

Z-SPARS Track for 25-5 mm boom (per meter)

Z-SPARS - MAST TRACK 25-1...

Mast track 25 mm. Sold by the metre.

Mast track 25 mm. Sold by the metre.

Z-SPARS - MAST TRACK 25/3...

Mast track 25 mm. Sold by the metre.

Mast track 25 mm. Sold by the metre.

Z-SPARS - SPINNAKER POLE...

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6 meters.

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6 meters.

Z-SPARS - SPINNAKER POLE...

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6 meters.

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6 meters.

Z-SPARS - SPINNAKER POLE...

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6,50 meters.

Aluminum profile for spinnaker poles. The price is per meter. You can order any length you want. Maximum length is 6,50 meters.