Home

Z-SPARS - HALYARD EXIT...

Plastic halyard exit plate, visible when installed, (135 x 30 mm), and will handle a line up to 13 mm in diameter. The cast plate fits in the mast cutout 96mm long x 20mm wide and fastens with a 5 mm rivet.

Plastic halyard exit plate, visible when installed, (135 x 30 mm), and will handle a line up to 13 mm in diameter. The cast plate fits in the mast cutout 96mm long x 20mm wide and fastens with a 5 mm rivet.

Z-SPARS - MEDIUM BOOM VANG...

Vang hold load: 250  kg / 551 lbs Range of vang: 180 mm Compatible with boom: Z362 & Z482 Fork Gap: 13 mm Connecting Pin Size: 10 mm Pin to pin length: 2040 mm Weight: 5,1 kg Boom tang: assembly 3047 Mast tang: assembly 3246 / 3252

Vang hold load: 250  kg / 551 lbs Range of vang: 180 mm Compatible with boom: Z362 & Z482 Fork Gap: 13 mm Connecting Pin Size: 10 mm Pin to pin length: 2040 mm Weight: 5,1 kg Boom tang: assembly 3047 Mast tang: assembly 3246 / 3252

Z-SPARS - MAST BASE BLOCK...

A block with a 45 mm diameter sheave will accommodate lines up to 12 mm in diameter. Includes 8mm stud with nut to fit deck castings with 8mm holes and 13mm wide slots for nuts.block with a 45 mm diameter sheave will accommodate lines up to 12 mm in diameter. Includes 8mm stud with nut to fit...

A block with a 45 mm diameter sheave will accommodate lines up to 12 mm in diameter. Includes 8mm stud with nut to fit deck castings with 8mm holes and 13mm wide slots for nuts.block with a 45 mm diameter sheave will accommodate lines up to 12 mm in diameter. Includes 8mm stud with nut to fit...

Z-SPARS - Block Base 10mm D166

Z-SPARS - MAST BASE BLOCK...

A block with an 80 mm diameter sheave will accommodate lines up to 16 mm in diameter. Includes 10 mm stud with nut to fit deck castings with 10 mm holes and 17 mm wide slots for nuts.

A block with an 80 mm diameter sheave will accommodate lines up to 16 mm in diameter. Includes 10 mm stud with nut to fit deck castings with 10 mm holes and 17 mm wide slots for nuts.

Z-SPARS - MAST BASE SWIVEL...

A block with an 60 mm diameter sheave will accommodate lines up to 14 mm in diameter. Includes 10 mm stud with nut to fit deck castings with 10 mm holes and 17 mm wide slots for nuts.

A block with an 60 mm diameter sheave will accommodate lines up to 14 mm in diameter. Includes 10 mm stud with nut to fit deck castings with 10 mm holes and 17 mm wide slots for nuts.

Z-SPARS - MAST BASE SWIVEL...

A block with an 80 mm diameter sheave will accommodate lines up to 16 mm in diameter. Includes 10 mm stud with nut to fit deck castings with 10 mm holes and 17 mm wide slots for nuts.

A block with an 80 mm diameter sheave will accommodate lines up to 16 mm in diameter. Includes 10 mm stud with nut to fit deck castings with 10 mm holes and 17 mm wide slots for nuts.

Z-SPARS - SHEAVE BOX LARGE,...

Large rope sheave box for the mast, polyester (Ø78.5x17.5 mm)

Large rope sheave box for the mast, polyester (Ø78.5x17.5 mm)

Z-SPARS - BOOM BAIL SLIDER...

Stainless steel articulating boom bail fits in the integral track on the underside of Z160, Z204, and other boom sections with a 20mm wide track. Bail is made from 7mm rod. The formed plate is 2mm thick and measures 80mm long x 20mm wide. Fastens with 5mm rivets.

Stainless steel articulating boom bail fits in the integral track on the underside of Z160, Z204, and other boom sections with a 20mm wide track. Bail is made from 7mm rod. The formed plate is 2mm thick and measures 80mm long x 20mm wide. Fastens with 5mm rivets.

Z-SPARS - BOOM BAIL SLIDER...

Stainless steel articulating boom bail fits in the integral track on the underside of Z360-Z480, and other boom sections with a 30mm wide track. Bail is made from 10 mm rod. The formed plate is 2,5 mm thick and measures 120 mm long x 30 mm wide. Fastens with 5mm rivets.

Stainless steel articulating boom bail fits in the integral track on the underside of Z360-Z480, and other boom sections with a 30mm wide track. Bail is made from 10 mm rod. The formed plate is 2,5 mm thick and measures 120 mm long x 30 mm wide. Fastens with 5mm rivets.

Z-SPARS - BOOM CAR BALL...

Z-SPARS Small size car for Boom, for 25mm rail (compatible with Z160/204/360 booms)

Z-SPARS Small size car for Boom, for 25mm rail (compatible with Z160/204/360 booms)

Z-SPARS - BOOM OUTHAUL CAR...

Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z690 booms) Large size / Rod bearings / Suitable for 25 mm track

Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z690 booms) Large size / Rod bearings / Suitable for 25 mm track

Z-SPARS - MAINSAIL LUFF FEEDER

Gray plastic mainsail feeder entrance is used on all Z-Spars mast sections that use a boltrope luff. Unit is 80mm high x maximum 45mm wide and fastens with 3/16" rivets or screws. Fasteners are on 65mm vertical x 30 mm (lower) x 23mm (upper) hole centers.

Gray plastic mainsail feeder entrance is used on all Z-Spars mast sections that use a boltrope luff. Unit is 80mm high x maximum 45mm wide and fastens with 3/16" rivets or screws. Fasteners are on 65mm vertical x 30 mm (lower) x 23mm (upper) hole centers.

Spreader Tip Dinghy Assembly

Z-SPARS - SPREADER TIP END...

New-style gray plastic spreader tip for use with tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum 62 mm long x 29 mm wide.

New-style gray plastic spreader tip for use with tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum 62 mm long x 29 mm wide.

Z-SPARS - SPREADER TIP END...

Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...

Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...

Z-SPARS - BOOM TRACK END

Track end for 25 mm track Material: Composite

Track end for 25 mm track Material: Composite

Z-SPARS - END FOR SPINNAKER...

Z-SPARS - SPINNAKER POLE...

Spinnaker pole end (diam.80 mm)

Spinnaker pole end (diam.80 mm)

Z-SPARS - SPINNAKER POLE...

Spinnaker pole end (diam.100 mm)

Spinnaker pole end (diam.100 mm)

Z-SPARS - HALYARD SWIVEL...

The halyard swivel D-shackle assembly, designed for secure halyard connections and smooth sail handling. Manufactured from high-quality marine-grade stainless steel, this shackle offers excellent corrosion resistance and long-term durability, even in harsh saltwater environments. 

The halyard swivel D-shackle assembly, designed for secure halyard connections and smooth sail handling. Manufactured from high-quality marine-grade stainless steel, this shackle offers excellent corrosion resistance and long-term durability, even in harsh saltwater environments. 

Z-SPARS -D-SHACKLE FOR THE...

This Shackle is a high-quality marine-grade shackle designed to provide secure and reliable tack connections in sailing applications. Made from corrosion-resistant stainless steel, this shackle ensures durability and longevity, even in harsh saltwater environments.

This Shackle is a high-quality marine-grade shackle designed to provide secure and reliable tack connections in sailing applications. Made from corrosion-resistant stainless steel, this shackle ensures durability and longevity, even in harsh saltwater environments.

Z-SPARS - SPINNAKER POLE...

Spinnaker pole conical end (Ø 80 mm)

Spinnaker pole conical end (Ø 80 mm)

Z-SPARS - SPINNAKER POLE...

Spinnaker pole conical end (Ø 100 mm)

Spinnaker pole conical end (Ø 100 mm)

Intermediate Car For 32mm...

Z-SPARS - INTERMEDIATE CAR...

Ball bearing intermediate car for use with masts using Z-Spar RCB 25 mm track. The car incorporates delrin spool for attachment to the sail with webbing. Car rides on torlon ball bearings to provide high strength and low friction at a minimum weight. Short cars allow reduced stack height. The car...

Ball bearing intermediate car for use with masts using Z-Spar RCB 25 mm track. The car incorporates delrin spool for attachment to the sail with webbing. Car rides on torlon ball bearings to provide high strength and low friction at a minimum weight. Short cars allow reduced stack height. The car...

Z-SPARS - BATTEN CAR WITH...

New-style batten car for use with masts using Z-Spar RCB 25 mm Track. The car incorporates a fully articulating stainless steel toggle with 10 mm stainless steel threaded stud (22mm thread) for batten attachment. Car rides on torlon slide rods to provide high strength and low friction, and will...

New-style batten car for use with masts using Z-Spar RCB 25 mm Track. The car incorporates a fully articulating stainless steel toggle with 10 mm stainless steel threaded stud (22mm thread) for batten attachment. Car rides on torlon slide rods to provide high strength and low friction, and will...

Z-SPARS - SPREADER TIP END...

Gray plastic spreader tip for use with the tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum of 87 mm long x 55 mm wide.

Gray plastic spreader tip for use with the tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum of 87 mm long x 55 mm wide.

Z-SPARS - SPREADER TIP END...

Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...

Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...

Z-SPARS - BOOM OUTHAUL CAR...

Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z482 booms) Medium size / Rod bearings / Maximum outhaul rope diameter 10 mm

Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z482 booms) Medium size / Rod bearings / Maximum outhaul rope diameter 10 mm

Z-SPARS - SHEAVE BOX LARGE,...

Large rope sheave box for the mast, alıuminum (Ø110 mm)

Large rope sheave box for the mast, alıuminum (Ø110 mm)

Z-SPARS - BACKING MAST...

Backing cap for ZSpars the mast for 4-5mm wire with ball end.

Backing cap for ZSpars the mast for 4-5mm wire with ball end.

Z-SPARS - BACKING MAST...

Backing cap for ZSpars the mast for 7-8mm wire with ball end

Backing cap for ZSpars the mast for 7-8mm wire with ball end

Z-SPARS - BACKING MAST...

Backing cap for ZSpars the mast for 7-8mm wire with ball end

Backing cap for ZSpars the mast for 7-8mm wire with ball end

ZSPARS - ROD SLIDES (133 MM...

Teflon rod set for the mainsail outhaul car. Replaces ball bearings, 7.9 mm diameter, 133 mm length (fits 3074 boom car, comes in a pack of 2)

Teflon rod set for the mainsail outhaul car. Replaces ball bearings, 7.9 mm diameter, 133 mm length (fits 3074 boom car, comes in a pack of 2)

Z-SPARS -Spreader bar Z240...

Z-SPARS - DERLIN SHEAVE...

Derlin sheave with ball bearing (Ø 60 mm X 16 mm, pin Ø 8 mm)

Derlin sheave with ball bearing (Ø 60 mm X 16 mm, pin Ø 8 mm)

ALUMINIUM SHEAVE BOX...

Z-SPARS - MAINSHEET BOOM...

Stainless steel articulating mainsheet boom bail fits in the integral track on the underside of Z690-Z692, and other boom sections Bail is made from 10 mm rod. The bail is a formed plate that is 3 mm thick and measures 140 mm long x 34 mm wide. Fastens with 5mm rivets.

Stainless steel articulating mainsheet boom bail fits in the integral track on the underside of Z690-Z692, and other boom sections Bail is made from 10 mm rod. The bail is a formed plate that is 3 mm thick and measures 140 mm long x 34 mm wide. Fastens with 5mm rivets.

Z-SPARS - BATTEN CAR WITH...

Mainsail batten car with ball bearings (compatible with 32mm track)

Mainsail batten car with ball bearings (compatible with 32mm track)

Z-SPARS - PLASTIC...

Replacement plastic worm drive for the sail furling mechanism. Used together with furling line to furl or unfurl the mainsail manually or mechanically. Made of durable marine‑grade plastic with high wear resistance, designed to handle the loads from the worm mechanism, ensuring smooth...

Replacement plastic worm drive for the sail furling mechanism. Used together with furling line to furl or unfurl the mainsail manually or mechanically. Made of durable marine‑grade plastic with high wear resistance, designed to handle the loads from the worm mechanism, ensuring smooth...

SPREADER END Z240 UNTAPERED...

Z-SPARS - BATTEN CAR BODY...

Batten car body for mainsail. Ball bearings are not included. 34 ball bearings are required (product code 4515)

Batten car body for mainsail. Ball bearings are not included. 34 ball bearings are required (product code 4515)

Z-SPARS - STEMBALL BACKING...

Backing cap for ZSpars the mast for 8-10mm wire with ball end

Backing cap for ZSpars the mast for 8-10mm wire with ball end

Z-SPARS - PLASTIC COVER FOR...

Z-SPARS Plastic cover for the mast ( 85 X 35 mm)

Z-SPARS Plastic cover for the mast ( 85 X 35 mm)

Z-SPARS - PLASTIC COVER FOR...

Z-SPARS Plastic cover for the mast ( 110 X 60 mm)

Z-SPARS Plastic cover for the mast ( 110 X 60 mm)

Z-SPARS - CLEAT 170 MM PLASTIC

Plastic cleat for the mast Color : Gray Length : 170 mm Width : 25 mm Height : 23 mm

Plastic cleat for the mast Color : Gray Length : 170 mm Width : 25 mm Height : 23 mm

Z-SPARS - CLEAT 120 MM PLASTIC

Plastic cleat for the mast Color : Gray Length : 120 mm Width : 20 mm Height : 18 mm

Plastic cleat for the mast Color : Gray Length : 120 mm Width : 20 mm Height : 18 mm