New-style gray plastic spreader tip for use with tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum 62 mm long x 29 mm wide.
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...
Gray plastic spreader tip for use with the tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum of 87 mm long x 55 mm wide.
Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...
Aluminum spreader tip for use with the Z95 spreader. The tip is a maximum of 105 mm long x 80 mm wide (pin 12/8).
Aluminum spreader tip for use with the Z240 spreader. The tip is a maximum of 165 mm long x 130 mm wide (pin 12/16).
Aluminum spreader tip for use with the Z240 spreader. The tip is a maximum of 165 mm long x 130 mm wide (pin 12/19).
Gray plastic spreader tip for use with Z60 spreader. Includes 5mm J-bolt with locknut, Z-1480A, to clamp shroud to the spreader tip prior to installation in the spreader tube. The tip is a maximum 45 mm long x 24 mm wide.
