Filter By
Categories
TYPE :
Availability
Brand
Price
Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z690 booms) Large size / Rod bearings / Suitable for 25 mm track
Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z690 booms) Large size / Rod bearings / Suitable for 25 mm track
Gray plastic mainsail feeder entrance is used on all Z-Spars mast sections that use a boltrope luff. Unit is 80mm high x maximum 45mm wide and fastens with 3/16" rivets or screws. Fasteners are on 65mm vertical x 30 mm (lower) x 23mm (upper) hole centers.
Gray plastic mainsail feeder entrance is used on all Z-Spars mast sections that use a boltrope luff. Unit is 80mm high x maximum 45mm wide and fastens with 3/16" rivets or screws. Fasteners are on 65mm vertical x 30 mm (lower) x 23mm (upper) hole centers.
New-style gray plastic spreader tip for use with tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum 62 mm long x 29 mm wide.
New-style gray plastic spreader tip for use with tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum 62 mm long x 29 mm wide.
Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...
Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...
Track end for 25 mm track Material: Composite
Track end for 25 mm track Material: Composite
Spinnaker pole end (diam.80 mm)
Spinnaker pole end (diam.80 mm)
Spinnaker pole end (diam.100 mm)
Spinnaker pole end (diam.100 mm)
The halyard swivel D-shackle assembly, designed for secure halyard connections and smooth sail handling. Manufactured from high-quality marine-grade stainless steel, this shackle offers excellent corrosion resistance and long-term durability, even in harsh saltwater environments.
The halyard swivel D-shackle assembly, designed for secure halyard connections and smooth sail handling. Manufactured from high-quality marine-grade stainless steel, this shackle offers excellent corrosion resistance and long-term durability, even in harsh saltwater environments.
This Shackle is a high-quality marine-grade shackle designed to provide secure and reliable tack connections in sailing applications. Made from corrosion-resistant stainless steel, this shackle ensures durability and longevity, even in harsh saltwater environments.
This Shackle is a high-quality marine-grade shackle designed to provide secure and reliable tack connections in sailing applications. Made from corrosion-resistant stainless steel, this shackle ensures durability and longevity, even in harsh saltwater environments.
Spinnaker pole conical end (Ø 80 mm)
Spinnaker pole conical end (Ø 80 mm)
Spinnaker pole conical end (Ø 100 mm)
Spinnaker pole conical end (Ø 100 mm)
Ball bearing intermediate car for use with masts using Z-Spar RCB 25 mm track. The car incorporates delrin spool for attachment to the sail with webbing. Car rides on torlon ball bearings to provide high strength and low friction at a minimum weight. Short cars allow reduced stack height. The car...
Ball bearing intermediate car for use with masts using Z-Spar RCB 25 mm track. The car incorporates delrin spool for attachment to the sail with webbing. Car rides on torlon ball bearings to provide high strength and low friction at a minimum weight. Short cars allow reduced stack height. The car...
New-style batten car for use with masts using Z-Spar RCB 25 mm Track. The car incorporates a fully articulating stainless steel toggle with 10 mm stainless steel threaded stud (22mm thread) for batten attachment. Car rides on torlon slide rods to provide high strength and low friction, and will...
New-style batten car for use with masts using Z-Spar RCB 25 mm Track. The car incorporates a fully articulating stainless steel toggle with 10 mm stainless steel threaded stud (22mm thread) for batten attachment. Car rides on torlon slide rods to provide high strength and low friction, and will...
Gray plastic spreader tip for use with the tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum of 87 mm long x 55 mm wide.
Gray plastic spreader tip for use with the tapered Z95 spreader. Includes C-Clamp with screw, to clamp shroud to the spreader tip. When installed, the clamp must be tight and positioned carefully on the shroud. The tip is a maximum of 87 mm long x 55 mm wide.
Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...
Gray plastic spreader tip for use with the tapered Z240 spreader. Includes 6mm L-bolt with locknut, to clamp shroud to the spreader tip prior to installation in the spreader tube. When used with hinged spreader bases, clamp must be tight and positioned carefully on the shroud. The tip is a...
Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z482 booms) Medium size / Rod bearings / Maximum outhaul rope diameter 10 mm
Boom outhaul car for tensioning the foot of the mainsail (suitable for Z362-Z482 booms) Medium size / Rod bearings / Maximum outhaul rope diameter 10 mm
Large rope sheave box for the mast, alıuminum (Ø110 mm)
Large rope sheave box for the mast, alıuminum (Ø110 mm)
Backing cap for ZSpars the mast for 4-5mm wire with ball end.
Backing cap for ZSpars the mast for 4-5mm wire with ball end.
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Backing cap for ZSpars the mast for 7-8mm wire with ball end
Teflon rod set for the mainsail outhaul car. Replaces ball bearings, 7.9 mm diameter, 133 mm length (fits 3074 boom car, comes in a pack of 2)
Teflon rod set for the mainsail outhaul car. Replaces ball bearings, 7.9 mm diameter, 133 mm length (fits 3074 boom car, comes in a pack of 2)
Derlin sheave with ball bearing (Ø 60 mm X 16 mm, pin Ø 8 mm)
Derlin sheave with ball bearing (Ø 60 mm X 16 mm, pin Ø 8 mm)
Stainless steel articulating mainsheet boom bail fits in the integral track on the underside of Z690-Z692, and other boom sections Bail is made from 10 mm rod. The bail is a formed plate that is 3 mm thick and measures 140 mm long x 34 mm wide. Fastens with 5mm rivets.
Stainless steel articulating mainsheet boom bail fits in the integral track on the underside of Z690-Z692, and other boom sections Bail is made from 10 mm rod. The bail is a formed plate that is 3 mm thick and measures 140 mm long x 34 mm wide. Fastens with 5mm rivets.
Mainsail batten car with ball bearings (compatible with 32mm track)
Mainsail batten car with ball bearings (compatible with 32mm track)
Replacement plastic worm drive for the sail furling mechanism. Used together with furling line to furl or unfurl the mainsail manually or mechanically. Made of durable marine‑grade plastic with high wear resistance, designed to handle the loads from the worm mechanism, ensuring smooth...
Replacement plastic worm drive for the sail furling mechanism. Used together with furling line to furl or unfurl the mainsail manually or mechanically. Made of durable marine‑grade plastic with high wear resistance, designed to handle the loads from the worm mechanism, ensuring smooth...
Batten car body for mainsail. Ball bearings are not included. 34 ball bearings are required (product code 4515)
Batten car body for mainsail. Ball bearings are not included. 34 ball bearings are required (product code 4515)
Backing cap for ZSpars the mast for 8-10mm wire with ball end
Backing cap for ZSpars the mast for 8-10mm wire with ball end
Z-SPARS Plastic cover for the mast ( 85 X 35 mm)
Z-SPARS Plastic cover for the mast ( 85 X 35 mm)
Z-SPARS Plastic cover for the mast ( 110 X 60 mm)
Z-SPARS Plastic cover for the mast ( 110 X 60 mm)
Plastic cleat for the mast Color : Gray Length : 170 mm Width : 25 mm Height : 23 mm
Plastic cleat for the mast Color : Gray Length : 170 mm Width : 25 mm Height : 23 mm
Plastic cleat for the mast Color : Gray Length : 120 mm Width : 20 mm Height : 18 mm
Plastic cleat for the mast Color : Gray Length : 120 mm Width : 20 mm Height : 18 mm
İntermediate car body for mainsail. Ball bearings are not included
İntermediate car body for mainsail. Ball bearings are not included
Vang hold load: 500 kg /1000 lbs Range of vang: 150 mm Compatible with: Z482 & Z692 Fork Gap: 28 mm/ 1 inch Connecting Pin Size: 12 mm Pin to pin length: 2240 mm Weight: 9,3 kg Boom tang: assembly 3456 Mast tang: assembly 3811
Vang hold load: 500 kg /1000 lbs Range of vang: 150 mm Compatible with: Z482 & Z692 Fork Gap: 28 mm/ 1 inch Connecting Pin Size: 12 mm Pin to pin length: 2240 mm Weight: 9,3 kg Boom tang: assembly 3456 Mast tang: assembly 3811
