Filter By
Categories
TYPE :
Availability
Brand
Price
Home
2:1 BLOCK FOR KF4.5 / KF6.0...
2:1 block for KF4.5 and KF6.0 swivels. This block is used on the furling swivel to divise the forces when setting up and tensioning the sail. The advantage of this addition to the standard set-up is reduced weight whilst hoisting and better tension on the stay.
2:1 block for KF4.5 and KF6.0 swivels. This block is used on the furling swivel to divise the forces when setting up and tensioning the sail. The advantage of this addition to the standard set-up is reduced weight whilst hoisting and better tension on the stay.
3:1 FRICTION SHEAVE KF12.0...
3: 1 friction sheave for KF12.0 furler. Karver's quick-release stainless steel 3:1 friction sheave provides a flexible solution for the connection of the drum to the deck/bowsprit or can be used as a sheave for a 2:1 halyard. With the option of using it in either a 2:1 or 3:1 configuration, this...
3: 1 friction sheave for KF12.0 furler. Karver's quick-release stainless steel 3:1 friction sheave provides a flexible solution for the connection of the drum to the deck/bowsprit or can be used as a sheave for a 2:1 halyard. With the option of using it in either a 2:1 or 3:1 configuration, this...
3:1 FRICTION SHEAVE KF4.5...
3: 1 friction sheave for KF4.5 furler. Karver's quick-release stainless steel 3:1 friction sheave provides a flexible solution for the connection of the drum to the deck/bowsprit or can be used as a sheave for a 2:1 halyard. With the option of using it in either a 2:1 or 3:1 configuration, this...
3: 1 friction sheave for KF4.5 furler. Karver's quick-release stainless steel 3:1 friction sheave provides a flexible solution for the connection of the drum to the deck/bowsprit or can be used as a sheave for a 2:1 halyard. With the option of using it in either a 2:1 or 3:1 configuration, this...
3:1 FRICTION SHEAVE KF6.0...
3: 1 friction sheave for KF6.0 furler. Karver's quick-release stainless steel 3:1 friction sheave provides a flexible solution for the connection of the drum to the deck/bowsprit or can be used as a sheave for a 2:1 halyard. With the option of using it in either a 2:1 or 3:1 configuration, this...
3: 1 friction sheave for KF6.0 furler. Karver's quick-release stainless steel 3:1 friction sheave provides a flexible solution for the connection of the drum to the deck/bowsprit or can be used as a sheave for a 2:1 halyard. With the option of using it in either a 2:1 or 3:1 configuration, this...
3:1 FRICTION SHEAVE KF8.0...
3: 1 friction sheave for KF8.0 furler. Karver's quick-release stainless steel 3:1 friction sheave provides a flexible solution for the connection of the drum to the deck/bowsprit or can be used as a sheave for a 2:1 halyard. With the option of using it in either a 2:1 or 3:1 configuration, this...
3: 1 friction sheave for KF8.0 furler. Karver's quick-release stainless steel 3:1 friction sheave provides a flexible solution for the connection of the drum to the deck/bowsprit or can be used as a sheave for a 2:1 halyard. With the option of using it in either a 2:1 or 3:1 configuration, this...
- Out-of-Stock
KCW45 - WINCH COMPACT 45 (2...
The KCW45 is an ultra-compact 2-speed winch for sailboats up to 40 feet (12 meters). It is the only winch on the market to offer both a very fast speed (1st speed) and a very powerful speed (2nd speed). It can replace any winch up to size 40. The KCW45 won the international innovation and design...
The KCW45 is an ultra-compact 2-speed winch for sailboats up to 40 feet (12 meters). It is the only winch on the market to offer both a very fast speed (1st speed) and a very powerful speed (2nd speed). It can replace any winch up to size 40. The KCW45 won the international innovation and design...
- Out-of-Stock
KF10.0 FURLER - STANDART...
The STANDARD KF10.0 is a furler that can withstand a workload of 10 T. It is intended for sailboats from 60 to 80 feet. The KF10.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
The STANDARD KF10.0 is a furler that can withstand a workload of 10 T. It is intended for sailboats from 60 to 80 feet. The KF10.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
KF1.5 FURLER - STANDAR VERSION
The STANDARD KF1.5 is a furler that can withstand a workload of 1.5 T. It is intended for sailboats from 25 to 35 feet. The KF1.5 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
The STANDARD KF1.5 is a furler that can withstand a workload of 1.5 T. It is intended for sailboats from 25 to 35 feet. The KF1.5 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
KF1.5 FURLER - STANDARD...
The LARGE STANDARD KF1.5 is a furler that can withstand a workload of 1.5 T. It is intended for sailboats from 25 to 40 feet. The LARGE KF1.5 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K...
The LARGE STANDARD KF1.5 is a furler that can withstand a workload of 1.5 T. It is intended for sailboats from 25 to 40 feet. The LARGE KF1.5 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K...
KF3.0 FURLER - STANDART...
The STANDARD KF3.0 is a furler that can withstand a workload of 3 T. It is intended for sailboats from 30 to 40 feet. The STANDARD KF3.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
The STANDARD KF3.0 is a furler that can withstand a workload of 3 T. It is intended for sailboats from 30 to 40 feet. The STANDARD KF3.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
KF3.0 FURLER - STANDARD...
The STANDARD LARGE KF3.0 is a furler that can withstand a workload of 3 T. It is intended for sailboats from 30 to 45 feet. The LARGE KF3.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
The STANDARD LARGE KF3.0 is a furler that can withstand a workload of 3 T. It is intended for sailboats from 30 to 45 feet. The LARGE KF3.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
KF4.5 FURLER - STANDART...
The STANDARD KF4.5 is a furler that can withstand a workload of 4.5 T. It is intended for sailboats from 40 to 55 feet. The KF4.5 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
The STANDARD KF4.5 is a furler that can withstand a workload of 4.5 T. It is intended for sailboats from 40 to 55 feet. The KF4.5 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok...
KF6.0 FURLER - STANDART...
The STANDARD KF6.0 is a furler that can withstand a workload of 6 T. It is intended for sailboats from 50 to 60 feet. The KF6.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok protection,...
The STANDARD KF6.0 is a furler that can withstand a workload of 6 T. It is intended for sailboats from 50 to 60 feet. The KF6.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok protection,...
KF8.0 FURLER - STANDART...
The STANDARD KF8.0 is a furler that can withstand a workload of 8 T. It is intended for sailboats from 55 to 65 feet. The KF8.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok protection,...
The STANDARD KF8.0 is a furler that can withstand a workload of 8 T. It is intended for sailboats from 55 to 65 feet. The KF8.0 is a Karver furler of the 3rd generation. It is fitted as standard with a carbon / Kevlar® continuous line wheel, a reinforced ABS casing protected by K Krok protection,...
KP33 PROFIL KIT (2M) +...
The KP33 kit includes a 2-meter KP33 profile fitted with a junction, 2 half bearings, and the appropriate screws. It is compatible with KRS20 furlers. Depending on the sailboat and the project, it is not uncommon to have to add or remove one or more profile kits in order to obtain the correct...
The KP33 kit includes a 2-meter KP33 profile fitted with a junction, 2 half bearings, and the appropriate screws. It is compatible with KRS20 furlers. Depending on the sailboat and the project, it is not uncommon to have to add or remove one or more profile kits in order to obtain the correct...
KPW150 WINCH EXTRA POWER...
The KPW150 is an innovative and very (very) efficient 4-speed automatic winch: 2 speeds identical to other winches on the market PLUS 2 additional extremely powerful speeds… 3 times more powerful than any other winch on the market. The KPW150 has the same dimensions as a size 50 winch (220 mm...
The KPW150 is an innovative and very (very) efficient 4-speed automatic winch: 2 speeds identical to other winches on the market PLUS 2 additional extremely powerful speeds… 3 times more powerful than any other winch on the market. The KPW150 has the same dimensions as a size 50 winch (220 mm...
KRE1.5 2-IN-ONE CLAMP...
Karver KRE1.5 clamp for anti-torsion line from 9 to 11 mm The KRE clamp allows a simple, fast installation, without heavy tools and offers the possibility of making a “blank” installation before cutting the rope to its final length. It is a unique clamp on the market, simple and innovative which...
Karver KRE1.5 clamp for anti-torsion line from 9 to 11 mm The KRE clamp allows a simple, fast installation, without heavy tools and offers the possibility of making a “blank” installation before cutting the rope to its final length. It is a unique clamp on the market, simple and innovative which...
KRE3.0 2-IN-ONE CLAMP...
Karver KRE3.0 clamp for anti-torsion line from 11 to 13 mm The KRE clamp allows a simple, fast installation, without heavy tools and offers the possibility of making a “blank” installation before cutting the rope to its final length. It is a unique clamp on the market, simple and innovative which...
Karver KRE3.0 clamp for anti-torsion line from 11 to 13 mm The KRE clamp allows a simple, fast installation, without heavy tools and offers the possibility of making a “blank” installation before cutting the rope to its final length. It is a unique clamp on the market, simple and innovative which...